Free planning tool
Office Space Calculator
Estimate how much usable and rentable office space your team needs. Enter headcount, growth and the rooms you want, adjust any assumption, and see the breakdown by component.
Preliminary planning estimate only. The architect's test fit, the building drawings and the permit set govern the actual layout.
0 sq ft rentable
| Component | Quantity | Each (sq ft) | Total (sq ft) | Total (m²) |
|---|
Ardenvale plans and builds office fit-outs and office renovations across the Greater Toronto Area.
Get a quote for your office fit-outUse this tool from any AI assistant
Paste this link into ChatGPT, Claude, Gemini, Copilot, Perplexity or any AI assistant and ask it to read the result:
Change the numbers in the link to match your project. All tools for AI assistants.
Sources and assumptions
- BOMA International, ANSI/BOMA Z65.1 Office Buildings: Standard Methods of Measurement Definitions of usable and rentable area and the use of a load factor to convert between them. The standard itself should be consulted for the measurement method.
- ANSI Blog, ANSI/BOMA Z65.1-2024 office building measurement Describes rentable area as the usable area plus a share of common areas such as lobbies, hallways and restrooms.
- U.S. General Services Administration, Workplace in an Evolving Environment Q&A (April 2026) Context only: describes 150 usable square feet per person as a maximum for federal administrative office space. It is not an Ontario requirement and is not used as a default.
- Planning assumptions The default per-seat and per-room areas, the circulation allowance and the load factor are adjustable planning assumptions chosen for early budgeting. They are not taken from a code or a single published standard. Replace them with your own figures.
- Ontario Building Code, Table 3.1.17.1 Minimum design occupant load, 9.30 square metres per person for offices. Not used in this calculation.
Planning an office fit-out or renovation?
Send us the plans or a short description of the space. We will arrange a site review and return a clear written quote for the office fit-out or commercial renovation.
Ardenvale plans and builds office fit-outs and office renovations across the Greater Toronto Area. Office fit-out · Office renovation
Frequently asked questions
What is the difference between usable and rentable area?
Usable area is the space a tenant occupies and controls, such as workstations, offices, meeting rooms and the circulation inside the suite. Rentable area is the usable area plus the tenant share of common building areas such as lobbies, corridors and shared washrooms. The ANSI/BOMA Z65.1 office standard sets out how landlords and tenants measure and compare these areas.
What is a load factor?
The load factor, sometimes called the core factor or add-on factor, is the ratio that converts usable area to rentable area. A load factor of 15 percent means the rentable area is 1.15 times the usable area. The actual figure is set by the landlord for the building and floor, so ask for it in writing before comparing spaces.
Why does the calculator include a desk sharing ratio?
Hybrid teams often do not need one desk for every employee. The ratio is the number of people per desk. A ratio of 1.5 means three desks serve every four and a half people, rounded up. Use the figure that your own attendance records support, not a general assumption.
How accurate is the result?
The result is a preliminary planning estimate only. Per-seat and per-room areas are adjustable planning assumptions, not code requirements. The test fit prepared by your architect or space planner, the building drawings and the permit set govern the actual layout.
Does the Ontario Building Code limit how many people can use the space?
Yes. The Building Code sets a minimum design occupant load by floor area, and the number of washroom fixtures and exits depends on it. For offices the table value is 9.30 square metres per person. Our occupant load calculator shows how that works.
What should I do after I have an estimate?
Share it with your landlord or broker to compare against floor plates, and ask your architect for a test fit. When you are ready to price a fit-out or renovation, send the plans or a short description and we will arrange a site review.
Cite this tool
Copy this HTML to link to the tool from your own page or document.